4-in-1 alloy electrical cabinet key *new*

Have you ever got frustrated by trying to open up an electrical cabinet, just to realize that you do..

Steel stand height 221mm 231x231x25mm + 231x231x25mm bases 4x M16 + 6x 17mm + 5x M8

Robust steel stand for levering robot installation off the table. Steel stand technical details: ..

Steel stand height 221mm 232x242x28mm ends 4x M16 + 4x 17mm

Robust steel stand for levering robot installation off the table. Steel stand technical details: ..

IC extraction tool, green plastic insulating grip *new*

This small neat tool is kinda must have for anyone who tinkers with electronics. This tool is used t..

M22x1.5, 16mm, RH, steel, jig table adjustment screw with 6x 3mm holes on sides

Adjustment screw, which specialty is a through hole for actual mounting screw and holes on the side ..

M16x1.5, 12mm, RH, steel, jig table adjustment screw with 8x 2,5mm holes on sides

Adjustment screw, which specialty is a through hole for actual mounting screw and holes on the side ..

175x175x30mm steel jig table with 4x 10,7mm mounting holes equipped with M22x1.5 threads for adjustment screws

Fixed T-slot table, designed to be used on drilling and milling machines, special holding assemblies..

146x146x22mm steel jig table with T-slots and 4x 6,5mm mounting holes equipped with M16x1.5 threads for adjustment screws

Fixed T-slot table, designed to be used on drilling and milling machines, special holding assemblies..

160x160x20mm steel jig table with T-slot and 4x 7mm mounting holes equipped with M12x1.25 threads for adjustment screws

Fixed T-slot table, designed to be used on drilling and milling machines, special holding assemblies..

Extra charge for a large package when sending in Finland by Post (> 110cm) or Matkahuolto (> 140cm)

Do you already know, that you are ordering stuff from us, which length goes beyond the dimensions of..

2x6x6x50mm-17°/45°-3T 2mm, 3-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting flat end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..

4x12x6x50mm-17°/45°-3T 4mm, 3-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting flat end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..

6x18x6x50mm-17°/45°-3T 6mm, 3-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting flat end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..

3x9x6x50mm-17°/45°-3T 3mm, 3-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting flat end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..

5,5x18x6x50mm-17°/45°-3T 5,5mm, 3-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting flat end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..

2,5x7x6x50mm-17°/45°-3T 2,5mm, 3-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting flat end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..

R1x4x6x50mm-17°/45°-2T 1mm, 2-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting rounded end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..

4,5x15x6x50mm-17°/45°-3T 4,5mm, 3-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting flat end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..

5x15x6x50mm-17°/45°-3T 5mm, 3-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting flat end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..

1,5x4x6x50mm-17°/45°-3T 1,5mm, 3-cutting faces, 6mm shank, 45° helix angle, 17° front angle, uncoated sintered solid carbide center cutting flat end mill with 50mm overall length *new*

End mills are tools which have cutting teeth at one end, as well as on the sides. They are used for ..