Mitsubishi Melsec A1SD62E A series 2-axis positioning unit 24VDC 0,19A

Mitsubishi Melsec A-series programmable logics are so called rack mountable models. All of the PLC c..

Siemens Simatic 6ES5 306-7LA11 interface module

6ES5 306-7LA11 is a bus module designed for use with the Simatic S5-115U programmable logic controll..

Siemens Simatic 6ES5 700-8MA11 bus module with 2x bus units

6ES5 700-8MA11 is a bus module designed for use with the Simatic S5-100U and S5-200U programmable lo..

Omron C200H-BC081-V2 CPU base unit (Backplane with 1x CPU + 8x unit slots) *new*

Omron C200HS series programmable logics are so called rack mountable models. All of the PLC componen..

Omron Sysmac CS1W-MC221 motion control unit

CS1W-MC221 is a high-performance motion control unit designed for the CS1 series PLCs. It is used fo..

Omron Sysmac C200H-NC211 XW2B-40J6-2B position control terminal block

This terminal block can be used with Omron C200H-NC211 position controller to break out it's I/O int..

Omron Sysmac C200H-BC101-V2 CPU base unit (Backplane with 1x CPU + 10x unit slots)

Omron C200HS series programmable logics are so called rack mountable models. All of the PLC componen..

Omron XW2B-20J6-3 terminal block conversion unit

XW2B-20J6-3 is a terminal block conversion unit designed to simplify the connection between I/O devi..

Omron XW2B-20J6-6 terminal block conversion unit

XW2B-20J6-6 is a terminal block conversion unit designed to simplify the connection between I/O devi..

Omron Sysmac C200H-NC112 XW2B-20J6-1B position control terminal block

This terminal block can be used with Omron C200H-NC112 position controller to break out it's I/O int..

Omron XW2B-40G5 terminal block conversion unit

XW2B-40G5 is a terminal block conversion unit designed to simplify the connection between I/O device..

Omron Sysmac C200H-MC221 position control unit

C200H-MC221 is a high-performance motion control unit designed for the CS1 series PLCs. It is used f..

Omron Sysmac CS1W-NC213 position control unit

CS1W-NC213 is a position control unit used in the CS1 series PLCs for controlling up to two axes of ..

Omron Sysmac C200H-BC031-V2 CPU base unit (Backplane with 1x CPU + 3x unit slots)

Omron C200HS series programmable logics are so called rack mountable models. All of the PLC componen..

Omron CJ1W-TER01 terminator end cover *new*

End plate module which is compatible with Omron CJ1W  series programmable logics. Download O..

Omron Sysmac C200HW-BC101 CPU base unit (Backplane with 1x CPU + 10x unit slots)

Omron C200HW series programmable logics are so called rack mountable models. All of the PLC componen..

Omron Sysmac C200HW-BI081 expansion base unit (Backplane with 8x unit slots)

Omron C200HW series programmable logics are so called rack mountable models. All of the PLC componen..

Weidmüller FM 4/TS35 0687900000 35mm DIN-rail mounting clip with M4 thread

Cover plate can be used to cover up terminal block's open end and protect the unwary fingers from el..

Omron Sysmac C200H-BC081-V2 CPU base unit (Backplane with 1x CPU + 8x unit slots)

Omron C200HS series programmable logics are so called rack mountable models. All of the PLC componen..

Mitsubishi Melservo MR-TB20 junction terminal block

This terminal block can be used with Mitsubishi Melservo series servo motor controllers to break out..