2x0,22mm² + noise shield Cu green balanced microphone cable Thomann Ssnake SMK 222 GN (by meter) *new*

A wire is made of electrically conductive material, ie a conductor that is a wire or combination of multiple wires connected as part of the circuit. Commonly electrical wires are made out of copper or aluminum and they are insulated with plastic or rubber insulation. Electrical cable might contain connectors, which allows it to be connected as easily removable into it’s destination.

Multicore wire is referred as cable. Electrical wires and cables are manufactured for various purposes and for numerous applications: they are manufactured for high voltages, high temperatures and to resist mechanical stress (robot cables) and chemical stress (special bedding materials). Shielded cable is required In radio technology and information communication (structure has additional shielding sheath). With high frequency cable creates always a transmission line, which has it’s own transfer impedance, which is required to take into account when transferring signals.

Wire thickness is represented as cross-section area/mm². Most common thicknesses are 0,5; 0,75; 1,0; 1,5; 2,5; 4; 6; 10; 16 and 25 mm². Cable current carrying capability is depending on the cross-section area - under normal circumstances 1,5mm² copper conductor withstands about 10A current. The current that exceeds the wire’s rated current will heat up electrical conductor. Heating is non-beneficial phenomena in electrical transfer. Because of it electrical energy is transformed into heat energy and reducing transfer efficiency. Heating wire may also be a safety hazard for the environment as in a form of fire.

If you happen to need more of this product than we actually have in our stock, fear non! We can get it more. Please contact our customer service and we can supply you with the desired amount.

Cable technical properties:

• Application fields:
  • Suitable for balanced or stereo audio signals. In practice works with digital signals like DMX, but it's not a recommended way of use.
  • Easy to peel and solder, fairly durable yet flexible, easy to coil and does not kink easily.
• Inner leads:
  • 2x 0,22mm² (AWG24) leads made out of 30x 0,1mm individual leads
• Inner leads insulation:
  • Super flexible PVC HT (high temperature) 105°C
• Inner lead diameter:
  • 1,60 mm
• Inner lead identification:
  • White
  • Red
• Outer conductor (noise shield):
  • Bare copper wrapped as spiral 16x 5x0.1mm which shields >90% of cable and wraps inside 2x cotton anti-kink yarns and inner leads
• Jacket:
  • Flexible PVC
• Jacket hardness:
  • 60 shore A scale
• Jacket nominal outer diameter:
  • 6,50mm
• Color:
  • Green
• Identification:
  • Thomann Ssnake SMK 222 GN
  • Disregarding this, Thomann does not actually manufacture the cables and because of that we strongly suspect that Proel has made this cable. This is cable is most likely Proel HPC210GN cable and the tech sheets match quite well with the Thomann one.
• Resistance:
  • 93Ω/km (inner lead) @ 20°C
  • 20Ω/km (outer lead) @ 20°C
• Impedance:
  • According to our measurements from similar cables the impedance is typically around . Although with audio cables this is not guaranteed and occasionally impedance can be all over the place.
• Capacitance:
  • 46pF/m (conductor/conductor) @ 1kHz
  • 90pF/m (conductor/shield) @ 1kHz
• Velocity factor:
  • 0,8 (80% of light speed in vacuum)
• Operating temperature:
  • -20...+70° C
• Max operating voltage:
  • 50VAC
  • 75VDC
• Minimum bending radius:
  • r=65mm (20x cable section radius)

Download Thomann Sssnake cables technical datasheet

Download Proel HPC210GN balanced microphone cable technical datasheet

Download Proel stage equipment product catalog