Two-way control stick with an aluminum body *new*

Two-way control stick with an aluminum body for industrial control and automation applications. The device features two push buttons for controlling movement in opposite directions. The electrical connection is made via a cable terminated with an 8-pin M12 male connector.

Note! The push-button backlights are not connected

Control stick technical details:

• Control stick length:
  • 400mm
• Control stick outer diameter:
  • 35mm
• Push buttons:
  • 2x buttons with green backlighting
  • Buttons have up and down arrows in their legend plates
• Mounting:
  • 1x M8 screw mounting at the bottom end
  • 1x mounting bracket at the top end with 2x 4,25mm holes
• Connection:
  • Both buttons get common pin. Both buttons have NO contacts wired into them
  • Light rings are not connected into M12 connector
  • Connection is easy to modify according to your needs
• Connectors;
  • PG9 threaded 8pin M12 connector
  • Connector can easily be swapped for PG9 cable gland if you wish to wire it directly