Deprag 1522-ES/0.15-1 vibratory bowl screwfeeder for small screws + 2x Deprag Micromat 345Z-708 compressed air operated screw drivers

DEPRAG screw feeding systems consist of the feed bowl unit, screw separator, an air connection and air maintenance unit, a mains power switch and electronic controller, 2 m standard length hose set, the mouthpiece guide and the mouthpiece as well as an
appropriate screwdriver receiver (adapter) and a sound enclosure cover.

Key features for screw feeding systems for handheld tools:

• Rationalised assembly
• Process optimisation
• High capacity
• Ergonomic and convenient for the operator
• Simple start-up

Deprag type 1511-ES/0.15 vibratory bowl feeder technical data:

• Amount of connectable drivers:
  • 2
• Feed rate:
  • 2x 45 parts/min
• Filling capacity:
  • 0.15l
• Max head diameter:
  • 4mm
• Max shaft length:
  • 8mm
• Range of shaft diameter:
  • 1...2,5mm
• Operating voltage:
  • 230VAC
• Power consumption:
  • 30W
• Air pressure requirement:
  • 0.63MPa (6,3Bar)
• Air connection:
  • 10mm
• Feedhose standard length:
  • 2m
• Feedhose max length:
  • 5m

Pneumatic screwdriver technical details:

• Screwdriver model:
  • Micromat-Z 345Z-708 part no 338053 G
• Motor size:
  • 0
• Torque:
  • Min:
    • 2Ncm
  • Soft pull-up:
    • 70Ncm
  • Hard pull-up:
    • 70Ncm
• Idling speed:
  • 600rpm
• Air consumption:
  • 0.1m³
• Main body diameter:
  • 17mm
• Lenght:
  • 130mm
• Weight:
  • 160g
• Noise level:
  • 65dB(A)
• Air hose diameter:
  • 3mm
• Drive hex female DIN ISO 1173:
  • 3mm (both units have torx head in place)
• Quick change chunk mounted:
  • Yes
• For screwfeeding max head diameter:
  • 6mm