SN-2549 pliers with EDM wire cut toolsteel die for crimping 0,08-1mm² 28-18AWG connectors *new*

Crimping pliers for crimping small connectors into small wires. These are the proper ratchet type crimping pliers, which will not let you open the jaws up, if the crimping has not been successfully finished first (unless you actuate the emergency open latch).

Crimping pliers technical details:

• Compatible wire size:
  • 0,08...1mm² (and the suitable connectors)
  • 28...18AWG (and the suitable connectors)
• Plier type:
  • SN-series ratchet type crimping plier with crimping force adjustment and ergonomic rounded handles with orange rubbery areas for increased grip
  • Interchangeable dies (locked in place with 2x Allen screws)
• Die type:
  • Custom made EDM wire cut toolsteel precision dies with 4x different crimp sizes. Compared to cheap molded/forged dies this die makes exact crimp and it does not feature any imperfections in it, not wrong dimensions, neither loose gaps. The pieces fit together so well, that they actually ooze out storage oil between the mating surfaces when crimped... Pure perfection. In addition the tool-steel is hard and durable. So high chance you will never wear these out in your lifetime.
  • On the drawback, die does not hold any markings next to the slots. Right slot can be extrapolated and tried, if the crimp you get is too loose then just try another time with a one size smaller slot.
  • Die is made out of two sheet metal pieces and feature a little notch in it. This notch allows for slightly larger crimp for the wire's strain relief (which grips the wire sheath) and tighter crimp for the actual conductor gripping part.
• Criping jaw sizes starting from the tip:
  • 1:
    • 0.08-0.5mm2 (AWG 28-22)
    • Crimping depth: 4mm
  • 2:
    • 0.25mm2 (AWG 28-24)
    • Crimping depth: 7mm
  • 3:
    • 0.5mm2 (AWG 22-20)
    • Crimping depth: 7mm
  • 4:
    • 1.0 mm2 (AWG 20-18)
    • Crimping depth: 7mm
• Compatible crimp connections:
  • AMP/TE Connectivity:
    • E.I. (2,5mm pitch)
    • E.I. (3,96mm pitch)
    • Mate-n-Lok (3,68mm pitch) (smaller pin versions)
  • Dupont:
    • 2,54mm pitch standard pins
  • Faston:
    • Tab connectors (2,8mm and narrow 4,8mm uninsulated open barrel versions)
  • Harwin:
    • M20 (2,54mm pitch)
  • Hirose:
    • DF11 (2mm pitch)
  • JST (Japan Solderless Terminal):
    • EH (2,5mm pitch)
    • GH (1,25mm pitch) (May not be able to crimp the smallest wire gauges)
    • JWPS (4mm pitch)
    • NH (2,5mm pitch)
    • PA (2mm pitch)
    • PH (2mm pitch)
    • PHD (2mm pitch)
    • RE (2,54mm pitch)
    • SH (1mm pitch) (May not be able to crimp the smallest wire gauges)
    • SM (2,5mm pitch)
    • VA (3,96mm pitch)
    • VH (3,96mm pitch)
    • XA (2,5mm pitch)
    • XH (2,54mm pitch)
    • ZH (1,5mm pitch)
  • KF:
    • KF2510 (2,54mm pitch)
  • Molex:
    • C-Grid (2,54mm pitch)
    • KK 156 (3,96mm pitch)
    • KK 254 (2,54mm pitch)
    • KK 200 (2mm pitch)
    • KK 5051 (2mm pitch)
    • Micro-Fit (3mm pitch)
      • 43030
      • 43031
    • Mini-Fit Jr (4,2mm pitch)
      • 5556
      • 5557
      • 5558
      • 5559. 
    • PicoBlade (1,25mm pitch) (May not be able to crimp the smallest wire gauges)
    • SL (2,54mm pitch)
  • D-Sub liittimet
    • E.g. RS-232 pins (2,77mm pitch)