15" open screen element PI568XG with ELO Intellitouch SCN-ST-FLT15.0-002-000 touchscreen element and 6mm screen glass

Screen with 6mm glass screen and ELO Intellitouch SCN-ST-FLT15.0-002-000 touch element. Touch element is controlled with ELO intellitouch 2500S serial controller. Delivery includes RS-cable, power supply uni and VGA cable.

Screen technical information:

• Screen size:
  • 15"
• Resolution:
  • 1024x768
• Operating voltage:
  • 12VDC
• Operating current:
  • 3A (marking)
  • 1.6A (according to our test should be enoug)
• Connections:
  • VGA
  • DC jack (for 12VDC power)
  • Pin connections on serial controller (more detailed in next chapter)
• User interface:
  • 7x buttons
  • 1x power on LED
• Touchscreen type:
  • Capacitive (most likely)

IntelliTouch 2500S SmartSet Serial Controller Jumpers, Pinouts and Technical information:

Jumper Settings:

• J1
  • Set NVRAM to Default on Power up
• J2
  • Set Emulation Mode = E281-4002

Power Requirements

•     5VDC, nominal (+4.75...+5.25VDC)
•     60mA, typical at = 5VDC

P2 Connections

• Pin       Signal                    Serial Communication Connections
•                                                          DB9     DB 25
• 1          Data Carrier Detect (DCD)         1           8
• 2          Data Set Ready (DSR)              6           6
• 3          Receive Data (RxD)                  2           3
• 4          Ready To Send (RTS)               7           4
• 5          Transmit Data (TxD)                 3           2
• 6          Clear To Send (CTS)                 8           5
• 7          Data Terminal Ready (DTR)       4           20
• 8          N/C                                         9           22
• 9          Ground (GND)                          5           7
• 10        Key     N/A     N/A

P4 Connections

• Pin     Signal
• 1        DC+
• 2        DC- (tied to pin 4)
• 3        N/C
• 4        DC- (tied to pin 2)
• 5        LED Remote
• 6        Key
• 7        N/C
• 8        Chassis Ground
• 9        - Reset
• 10      N/C