Panel mounted digital combined voltage and current meter YB27VA with 3-digit red and blue LED displays, 0...100VDC, 10A direct measurement *new*

Panel mounted voltage meter and current meter, which can be used in industrial or home environment and if preferred even in vehicles. Just connect few leads to your power supply (or that particular place you want to measure or monitor) and you are all set.

Voltage meter technical details:

• Operating voltage range:
  • 3.5...30VDC
• Current consumption:
  • <20mA
• Measurement range:
  • 0...100VDC
  • 0...10A (direct current measurement overinternal 0.01ohm shunt resistor)
• Min dimensions for mounting hole:
  • 45.5x26.5mm
• Min mounting depth:
  • 36mm
• Cover frame dimensions:
  • 47.8x29x2.5mm
• Display type:
  • 2x 3-digit 7-segment LED display with 5x7mm digit size
• Resolution:
  • 0.01A
  • 0.1V
• Display color:
  • Voltage display:
    • Red
  • Current display:
    • Blue
• Accuracy:
  • 1% (+/- 1 digit)
• Refresh rate:
  • ~500ms
• Connection:
  •  ~130mm wires
    • 3pin connector:
      • Black:
        • Common ground for measured signals (-) (!Note when connecting, that this pin is connected inside the device to operating current - pin!)
      • Red:
        • Input for voltage meter (+) (connect in parallel to voltage source)
      • Yellow:
        • Input for current meter (+) (connect in series with the load)
    • If preferred to use only one meter (current meter or voltage meter) alone it is suggested to ground unused meter input, just in case that possible noise signals will not get all the way to the meter display.
      •  
    • 2pin connector:
      • Black:
        • Operating current - (!Note when connecting, that this pin is connected inside the device to measurement side common ground pin!)
      • Red:
        • Operating current +
  • If preferred own cords can be used with suitable connector

We give 1 year warranty to this item.