Eaton Powerware 9125 1000i 1000VA UPS 220V With USB X-Slot card White

Eaton Powerware 9-series "Double Conversion" UPS unit for perfect back up power solutions - Protects against all 9 disturbances of electric grid!

• Rack mounting brackets:
  • Do not come with shipment of this product (Can be purchased separately)
• Color:
  • White
• Condition:
  • Operation will be tested. Units will be sold best looking units first. Be quick and get yourself one already today.
• Battery:
  • The condition of the batteries, that we have in stock is what it is. By default we ship the device without batteries (as an option we can get new batteries and install them in inside the UPS unit)
  • By default the unit has accommodated 2pcs of 12V 9Ah lead-gel batteries (as an example 151x64,5x94mm Panasonic UP-RW1245P1)
• Connections:
  • Power input:
    • 1x IEC C14 socket
  • Power output:
    • 6x IEC C13 socket
  • Management:
    • X-Slot unit with USB connection
    • REPO, Remote Emergency Power-off Installation. Works by shortening connector pins at the back of a UPS unit. This may be done for example with switch.
  • External battery connection:
    • 24V 30A
  • LAN transient protection
    • LAN in and LAN out (RJ45)

UPS in other words uninterruptible Power Supply.

Eaton Powerware 9125 1000i suits perfectly for 24/7 servers and Internet applications, data centers, centralized UPS solutions and other critical IT-solutions and also for feeding undisturbed electricity to industrial surveillance and automation solutions. At first the "Double conversion" circuit rectifies and filters mains power and after that UPS internal switching mode power supply electronics creates regulated power at the output. Because of this it will protect information and production systems from all power surges. Typical uptime with internal batteries for this kind of UPS unit is about 5-9 minutes. Powerware 9125-series 1000-3000VA units are equipped with socket connections. Device uptime can be extended with separate external battery module (EBM) which is made by Powerware or a decent do it yourself guy can make up the necessary connections and cables for example one may connect two truck batteries into series and extend uptime by this (hopefully the user knows what he is doing then)

How does one use this device, explained in simple English:

• Plug unit into mains power and turn on
• Connect device or devices of your choice into back panel. (Check from the device rating plate just in case that you will not overload the UPS. There is usually written power consumption in (most cases) Watts. This device can supply 800W / 1000VA at the max)
• Use device.
• Wait for power black out or power spikes or other abnormalities in mains power.
• In case power supply is cut off the UPS will let out a nasty sound to remind the user about this incident, that in case you will not cease what ever you are doing the power will be cut out soon.
• When electricity comes back on you do not need to do anything...If there is a reason to presume that power will not come back shortly then turn off your device in a controlled manner.

How easy it really is?

It is not necessary to use this for information technology. One may build a back up power supply for small microwave oven or just to charge electric tooth brush during the blackout. You may also protect your computers network cards by routing the network traffic through UPS and by this filtering out spikes (transients) that may occur into network cables. Configuration can be expanded and diversify by taking all the fun out of communication bus and setting up behind that some automatic shutdown protocols for servers or other industrial devices. When connecting REPO one may connect the UPS into existing fire alarm which will shut down devices in case of emergency and by this will not feed electricity into devices which are set on fire and making the situation worse. Can also be used with cable and switch to train remotely junior from living room couch into that computer playtime really ends exactly at 21:00.

This UPS does not only protect against loss of power, but also against the following power grid anomalies:

• Black outs in other words losing power (as mentioned earlier)
• Short duration under voltage
• Over voltage spikes
• Long term under voltage
• Long term over voltage
• Switching transients (Also eats up transients caused by thunderstorm lightings)
• High frequency interference
• Frequency fluctuation
• Harmonic distortions
• Filters out transients from network cables (If CAT cable is connected to the place reserved by for it at the back panel)

Technical properties:

• Electrical supply:
  • Input power:
    • 700 - 3000 VA
  • Nominal voltage:
    • 208 - 240 VAC
  • Voltage range:
    • 160 - 288 V (With out using battery power)
  • Max input current:
    • 5A
  • Input power efficiency:
    • >.95% typical
  • Frequency:
    • 50/60 Hz, Auto-sensing)
  • Frequency range:
    • 45 - 65 Hz
• Electrical output:
  • Output current from the device:
    • ±3% from nominal
  • Battery charging voltage:
    • ±3% from nominal
  • Efficiency:
    • 89...92%, Depends upon load
  • Frequency regulation:
    • ±3 Hz online state
    • ±1 Hz Battery operation
  • Load crest factor:
    • 3:1 ratio
• Expansion connections:
  • X-Slot module with USB connection
    • Optional available X-slot modules.
    • X-Slot ConnectUPS-X Web/SNMP/xHub Card
    • X-Slot ConnectUPS-M Card
    • X-Slot Multi-Server Card
    • X-Slot Relay Card (AS/400 compatible)
    • X-Slot Modbus Card
    • Expansion Chassis (Equipped with Modbus card)
    • Serial port / RS-232 communication port / COM port X-Slot module
• Battery:
  • Internal battery type:
    • 12V 9Ah, Sealed, maintenance free lead acid battery
  • Total voltage of battery cells:
    • 24V DC
  • EBM battery type:
    • 12V 9Ah, Sealed, maintenance free lead acid battery
  • Total voltage of battery cells:
    • 24V DC
• Operation on batteries
  • Battery operation time (in minutes) 700/1000 VA models
    • Load          Internal default battery    1 EBM  2 EBMs
    • 850VA/595W              6                        59       124
    • 700VA/490W              9                        72       156
    • 400VA/280W            19                      142       278
    • 200VA/140W            37                      271       546
    • 1250VA/875W          11                        46         87
    • 1000VA/700W            5                        48       104
• Exchanging of the batteries:
  • Internal and external batteries can be changed on the go (hot swap)
  • Device also monitors the battery health and gives exchange warning even up to 60 days in advance before complete destruction of batteries.
• Charging time:
  • <2 hours. from fully discharged to 80% of charge capacity under nominal mains characteristics.
• Starting with batteries:
  • Allows to start UPS without the presence of mains power.
• External battery feed:
  • 24VDC 30A
• General:
  • Construction / operating principle:
    • True online, double-conversion
  • Diagnostics:
    • Full system self test upon start up
• UPS bypass:
  • Automatic upon overloading UPS or when UPS fails
• Operating environment and safety:
  • Safety markings:
    • UL
    • CSA
    • VDE
    • CE
    • S
    • D
    • N
    • FI
    • B
    • NOM
    • R
  • EMC markings:
    • FCC class B
    • VCCI class II
    • 3000 FCC class A
    • FCC-A
    • VCCI-A
    • BSMI-A
    • C-Tick
    • CE certified
• Suppression of the short-circuit:
  • IEEE/ANSI C62.41 category B (earlier 587)
• Audible noise level:
  • <45 dBA (on mains power)
  • <50 dBA (on battery power)
• Ambient operating temperature:
  • 0°C...40°C (32°F...104°F)
• Heat transfer capacity:
  • 2066 BTU/hour Max
• Leak current:
  • <0.6mA typical
• Related air humidity:
  • 0...90%, non condensing
• REPO port:
  • NEC Code 645-11 intent and UL requirements
• Network traffic transient protection:
  • Input and output connections for 10Base-T network cable protection.
  • UL497A tested