Teltonika RUT956 (RUT956100000) cellular router *new*
- Manufacturer:
Teltonika - Model:
Teltonika RUT956100000 *new* - Dimension:
100 x 110 x 50 mm - Weight:
287 g - Availability: Pre-Order
- Condition: New
-
Price Including VAT: 297,44€
- Ex Tax: 237€
RUT956 is an industrial router that combines cellular, Wi-Fi, and wired connectivity options with automatic WAN failover and GNSS capabilities. Serial communication interfaces enable integrating more varied devices into the solution ecosystem, while I/O and advanced RutOS software facilitate equipment control, automation, and event notifications.
By default we have in stock/ship units with European firmware/configurations in them (main difference in varying frequency ranges and power supplies). If you need any other hardware revisions/power supplies, then contact us before ordering. Some resivions might have a different price and we need to know this requirement before we place an order for them to the factory.
RUT956100000 European unit (Europe, The Middle East, Africa, Korea, Thailand) supports the following bands:
- 4G (LTE-FDD):
- B1, B3, B5, B7, B8, B20
- 4G (LTE-TDD):
- B40
- 3G:
- B1, B5, B8
- 2G:
- B3, B8
Standard package includes EU power supply
Router technical details:
- Mobile:
- Mobile module:
- 4G (LTE) – Cat 4 up to 150Mbps
- 3G – up to 42Mbps
- 2G - up to 236.8kbps
- SIM switch:
- 2 SIM cards
- Auto-switch cases:
- weak signal
- Data limit
- SMS limit
- Roaming
- No network
- Network denied
- Data connection fail
- SIM idle protection
- Status:
- Signal strength (RSSI)
- SINR
- RSRP
- RSRQ
- EC/IO
- RSCP
- Bytes sent/received
- Connected band
- IMSI
- ICCID
- SMS:
- SMS status
- SMS configuration
- Send/read SMS via HTTP POST/GET
- EMAIL to SMS
- SMS to EMAIL
- SMS to HTTP
- SMS to SMS
- Scheduled SMS
- SMS autoreply
- SMPP
- USSD:
- Supports sending and reading Unstructured Supplementary Service Data messages
- Black/White list:
- Operator black/white list
- Multiple PDN:
- Possibility to use different PDNs for multiple network access and services
- Band management:
- Band lock
- Used band status display
- APN:
- Auto APN
- Bridge:
- Direct connection (bridge) between mobile ISP and device on LAN
- Pass through:
- Router assigns its mobile WAN IP address to another device on LAN
- Mobile module:
- Wireless:
- Wireless mode:
- IEEE 802.11b/g/n
- Access Point (AP)
- Station (STA)
- Wi-Fi security:
- WPA2-Enterprise - PEAP
- WPA2-PSK
- WEP
- WPA-EAP
- WPA-PSK
- AES-CCMP
- TKIP
- Auto cipher modes
- client separation
- SSID/ESSID:
- SSID stealth mode and access control based on MAC address
- Wi-Fi users:
- Up to 100 simultaneous connections
- Wireless Connectivity Features:
- Fast roaming (802.11r)
- Relayd
- Wireless MAC filter:
- Whitelist
- Blacklist
- Wireless mode:
- Ethernet:
- WAN:
- 1x WAN port 10/100Mbps
- Compliance with:
- IEEE 802.3
- IEEE 802.3u
- Supports auto MDI/MDIX
- LAN:
- 3x LAN port 10/100Mbps
- Compliance with:
- IEEE 802.3
- IEEE 802.3u
- Supports auto MDI/MDIX
- WAN:
- Network:
- Hotspot:
- Captive portal (Hotspot)
- Internal/external Radius server
- SMS authorization
- Internal/external landing page
- Walled garden
- User scripts
- URL parameters
- User groups
- individual user or group limitations
- user management
- 9 default customizable themes and option to upload and download customised hotspot themes
- Routing:
- Static routing
- Dynamic routing:
- BGP
- OSPF v2
- RIP v1/v2
- EIGRP
- NHRP
- Policy based routing
- Network protocols:
- TCP
- UDP
- IPv4
- IPv6
- ICMP
- NTP
- DNS
- HTTP
- HTTPS
- SFTP
- FTP
- SMTP
- SSL/TLS
- ARP
- VRRP
- PPP
- PPPoE
- UPNP
- SSH
- DHCP
- Telnet
- SMPP
- SMNP
- MQTT
- Wake On Lan (WOL)
- VoIP pass through support:
- H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoring:
- Ping Reboot
- Wget Reboot
- Periodic Reboot
- LCP and ICMP for link inspection
- Firewall:
- Port forward
- Traffic rules
- Custom rules
- DHCP:
- Static and dynamic IP allocation
- DHCP Relay
- QoS / Smart Queue Management (SQM):
- Traffic priority queuing by source/destination
- Service
- Protocol or port
- WMM, 802.11e
- DDNS:
- Supported >25 service providers, others can be configured manually
- Network backup:
- Wi-Fi WAN
- Mobile
- VRRP
- Wired options, each of which can be used as an automatic fail over
- Load balancing:
- Balance Internet traffic over multiple WAN connections
- SSHFS:
- Possibility to mount remote file system via SSH protocol
- Hotspot:
- Security:
- Authentication:
- Pre-shared key
- Digital certificates
- X.509 certificates
- TACACS+
- Radius
- IP & Login attempts block
- Firewall:
- Pre-configured firewall rules can be enabled via WebUI
- Unlimited firewall configuration via:
- CLI
- DMZ
- NAT
- NAT-T
- Attack prevention:
- DDOS prevention:
- SYN flood protection
- SSH attack prevention
- HTTP/HTTPS attack prevention
- Port scan prevention:
- SYN-FIN
- SYN-RST
- X-mas
- NULL flags
- FIN scan attacks
- DDOS prevention:
- VLAN:
- Port and tag-based VLAN separation
- Mobile quota control:
- Mobile data limit
- Customizable period
- Start time
- Warning limit
- Phone number
- Web filter:
- Blacklist for blocking out unwanted websites
- Whitelist for specifying allowed sites only
- Access control:
- Flexible access control of TCP
- UDP
- ICMP packets
- MAC address filter
- Authentication:
- VPN:
- OpenVPN:
- Multiple clients and a server can run simultaneously
- OpenVPN encryption:
- DES-CBC 64
- RC2-CBC 128
- DES-EDE-CBC 128
- DES-EDE3-CBC 192
- DESX-CBC 192
- BF-CBC 128
- RC2-40-CBC 40
- CAST5-CBC 128
- RC2-64-CBC 64
- AES-128-CBC 128
- AES-128-CFB 128
- AES-128-CFB1 128
- AES-128-CFB8 128
- AES-128-OFB 128
- AES-128-GCM 128
- AES-192-CFB 192
- AES-192-CFB1 192
- AES-192-CFB8 192
- AES-192-OFB 192
- AES-192-CBC 192
- AES-192-GCM 192
- AES-256-GCM 256
- AES-256-CFB 256
- AES-256-CFB1 256
- AES-256-CFB8 256
- AES-256-OFB 256
- AES-256-CBC 256
- IPsec:
- IKEv1
- IKEv2
- Encryption methods for IPsec:
- 3DES
- DES
- AES128
- AES192
- AES256
- AES128GCM8
- AES192GCM8
- AES256GCM8
- AES128GCM12
- AES192GCM12
- AES256GCM12
- AES128GCM16
- AES192GCM16
- AES256GCM16
- GRE:
- GRE tunnel
- GRE tunnel over IPsec support
- PPTP, L2TP:
- Client/Server instances can run simultaneously
- L2TPv3
- L2TP over IPsec support
- Stunnel:
- Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
- DMVPN:
- Method of building scalable IPsec VPNs
- SSTP:
- SSTP client instance support
- ZeroTier:
- ZeroTier VPN client support
- WireGuard:
- WireGuard VPN client and server support
- Tinc:
- Tinc offers encryption, authentication and compression in its tunnels
- Client and server support
- OpenVPN:
- MODBUS TCP SLAVE:
- ID range:
- Respond to one ID in range [1;255] or any
- Allow Remote Access:
- Allow access through WAN
- Custom registers:
- MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
- ID range:
- MODBUS TCP MASTER:
- Supported functions:
- 01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats:
- 8-bit: INT
- UINT; 16-bit: INT
- UINT (MSB or LSB first); 32-bit: float
- INT
- UINT (ABCD (big-endian)
- DCBA (little-endian)
- CDAB
- BADC
- Supported functions:
- MODBUS RTU MASTER (RS232):
- Supported baud rates:
- From 300 to 115200
- Supported functions:
- 01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats:
- 8-bit: INT
- UINT; 16-bit: INT
- UINT (MSB or LSB first); 32-bit: float
- INT
- UINT (ABCD (big-endian)
- DCBA (little-endian)
- CDAB
- BADC
- HEX
- ASCII
- Number of data bits:
- From 5 to 8
- Number of stop bits:
- 1 or 2
- Parity:
- None, Even
- Odd
- Flow:
- None
- RTS/CTS
- Xon/Xoff
- Duplex:
- Full duplex
- Supported baud rates:
- MODBUS RTU MASTER (RS485):
- Supported baud rates:
- From 300 to 230400
- Supported functions:
- 01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats:
- 8-bit: INT
- UINT; 16-bit: INT
- UINT (MSB or LSB first); 32-bit: float
- INT
- UINT (ABCD (big-endian)
- DCBA (little-endian)
- CDAB
- BADC
- HEX
- ASCII
- Number of data bits:
- 8
- Number of stop bits:
- 1
- Parity:
- None, Even
- Odd
- Flow:
- None
- Xon/Xoff
- Duplex:
- Half duplex
- Supported baud rates:
- Data to server:
- Protocol:
- HTTP(S)
- MQTT
- Azure MQTT
- Kinesis
- Protocol:
- MQTT Gateway:
- MQTT Gateway:
- Allows sending commands and receiving data from MODBUS Master through MQTT broker
- MQTT Gateway:
- DNP3:
- Supported modes:
- TCP Master
- DNP3 Outstation
- RTU Master
- Supported modes:
- Monitoring & management:
- WEB UI:
- HTTP/HTTPS
- status
- configuration
- FW update
- CLI
- Troubleshoot
- Event log
- System log
- Kernel log
- FOTA:
- Firmware update from server
- Automatic notification
- SSH:
- SSH (v1, v2)
- SMS:
- SMS status
- SMS configuration
- Send/read SMS via HTTP POST/GET
- Call:
- Reboot
- Status
- Mobile data on/off
- Output on/off
- answer/hang-up with a timer
- Wi-Fi on/off
- TR-069:
- OpenACS
- EasyCwmp
- ACSLite
- tGem
- LibreACS
- GenieACS
- FreeACS
- LibCWMP
- Friendly tech
- AVSystem
- MQTT:
- MQTT Broker
- MQTT publisher
- SNMP:
- SNMP (v1, v2, v3)
- SNMP Trap
- JSON-RPC:
- Management API over HTTP/HTTPS
- MODBUS:
- Modbus TCP status/control
- RMS:
- Teltonika Remote Management System (RMS)
- WEB UI:
- IoT Platforms:
- Cloud of Things:
- Allows monitoring of:
- Device data
- Mobile data
- Network info
- Availability
- Allows monitoring of:
- ThingWorx:
- Allows monitoring of:
- WAN Type
- WAN IP
- Mobile Operator Name
- Mobile Signal Strength
- Mobile Network Type
- Allows monitoring of:
- Cumulocity:
- Allows monitoring of:
- Device model
- Revision and serial number
- WAN Type and IP
- Mobile cell ID
- ICCID
- IMEI
- Connection type
- Operator
- Signal strength
- Allows monitoring of:
- Azure IoT Hub:
- Can send device IP
- Number of bytes sent/received
- Temperature
- PIN count to Azure IoT Hub server
- Mobile connection state
- Network link state
- IMEI
- ICCID
- Model
- Manufacturer
- Serial
- Revision
- IMSI
- SIM State
- PIN state
- GSM signal
- WCDMA RSCP
- WCDMA EC/IO
- LTE RSRP
- LTE SINR
- LTE RSRQ
- CELL ID
- Operator
- Operator number
- Connection type
- Cloud of Things:
- System characteristics:
- CPU:
- Mediatek, 580MHz
- MIPS 24KEc
- RAM:
- 128MB DDR2
- FLASH storage:
- 16MB
- SPI Flash
- CPU:
- Firmware / Configuration:
- WEB UI:
- Update FW from file
- Check FW on the server
- Configuration profiles
- Configuration backup
- FOTA:
- Update FW
- RMS:
- Update FW/configuration for multiple devices at once
- Keep settings:
- Update FW without losing the current configuration
- WEB UI:
- Firmware Customization:
- Operating system:
- RutOS (OpenWrt based Linux OS)
- Supported languages:
- Busybox shell
- Lua
- C
- C++
- Development tools:
- SDK package with build environment provided
- Operating system:
- Location Tracking:
- GNSS:
- GPS
- GLONASS
- BeiDou
- Galileo and QZSS
- Coordinates:
- GNSS coordinates via WebUI
- SMS
- TAVL
- RMS
- NMEA:
- NMEA 0183
- NTRIP:
- NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
- Server software:
- Supported server software:
- TAVL
- RMS
- Geofencing:
- Configurable multiple geofence zones
- GNSS:
- Serial:
- RS232:
- DB9 connector
- RS232 (with RTS, CTS flow control)
- RS485:
- RS485 Full Duplex (4 wires) and Half-Duplex (2 wires)
- 300-115200 baud rate
- Serial functions:
- Console
- Serial over IP
- Modem
- MODBUS gateway
- NTRIP Client
- RS232:
- USB:
- Data rate:
- USB 2.0
- Applications:
- Samba share
- USB-to-serial
- External devices:
- Possibility to connect external HDD
- Flash drive
- Additional modem
- Printer
- USB-serial adapter
- Storage formats:
- FAT, FAT32
- exFAT
- NTFS (read-only)
- ext2
- ext3
- ext4
- Data rate:
- Input / Output:
- Input:
- 1x digital dry input (0...3V)
- 1x digital galvanically isolated input (0...30V)
- 1x analog input (0...24V)
- 1x Digital non-isolated input (on 4-pin power connector)
- 0...5V detected as logic low
- 8...30V detected as logic high
- Output:
- 1x digital open collector output (30V, 250mA)
- 1x SPST relay output (40V, 4A)
- 1x Digital open collector output (30V, 300mA, on 4-pin power connector)
- Events:
- RMS
- SMS
- I/O juggler:
- Allows setting certain I/O conditions to initiate events
- Input:
- Power:
- Connector:
- 1x 4-pin Molex Micro-Fit 3.0 power connector:
- Compatible with Molex Micro-Fit 3.0 0430250400 connector housing
- 1x 4-pin Molex Micro-Fit 3.0 power connector:
- Input voltage range:
- 9...30VDC
- Reverse polarity protection
- Surge protection >31VDC 10us max
- PoE (passive)
- Passive PoE over spare pairs
- Possibility to power up through LAN1 port
- Not compatible with the following standards:
- IEEE 802.3af
- IEEE 802.3at
- IEEE 802.3bt
- Mode B
- 9...30VDC
- Power consumption:
- < 2W idle, < 7W Max
- Connector:
- Physical interfaces:
- Ethernet:
- 4x RJ45 ports 10/100Mbps
- I/O’s:
- 2 x Inputs and 2 x outputs on 10-pin industrial socket
- 1x digital input
- 1x digital output on 4-pin power connector (available from HW revision 1600)
- Status LEDs:
- 1x Bi-color connection status
- 5x Mobile connection strength
- 4x Eth status
- 1x Power
- SIM:
- 2 SIM slots (Mini SIM – 2FF)
- 1.8V/3V
- external SIM holder
- eSIM (Optional)
- Power:
- 1x 4-pin Molex Micro-Fit 3.0 power connector
- Compatible with Molex Micro-Fit 3.0 0430250400 connector housing
- 1x 4-pin Molex Micro-Fit 3.0 power connector
- Input/output:
- 1x 10-pin industrial socket for inputs/outputs
- Antennas:
- 2x SMA for LTE
- 2x RP-SMA for Wi-Fi
- 1x SMA for GNSS
- USB:
- 1x USB A port for external devices
- RS232:
- 1x DB9 socket
- RS485
- 1x 6-pin industrial socket
- Ethernet:
- Reset:
- Reboot/User default reset/Factory reset button
- Physical specification:
- Casing material:
- Aluminum housing
- Plastic panels
- Mounting options:
- 35mm DIN rail (can be mounted on two sides)
- Flat surface placement
- Casing material:
- Operating environment:
- Operating temperature:
- -40...75°C
- Operating humidity:
- 10% to 90% non-condensing
- Ingress protection rating:
- IP30
- Operating temperature:
- Regulatory & type approvals:
- Regulatory:
- CE/RED
- UKCA
- CB
- Regulatory:
- EMC emissions & immunity:
- ImmunityStandards:
- EN 301 489-1 V2.2.3
- EN 301 489-17 V3.2.4,
- Draft EN 301 489-19 V2.2.0,
- Final draft EN 301 489-52 V1.2.0
- EN 55032:2015+A1:2020
- EN 55035:2017+A11:2020
- EN 61000-3-3:2013+A1:2019
- EN IEC 61000-3-2:2019
- ESD:
- EN 61000-4-2:2009
- RS
- EN 61000-4-3:2020
- EFT:
- EN 61000-4-4:2012
- Surge immunity (AC Power Line):
- EN 61000-4-5:2014+A1:2017
- CS:
- EN 61000-4-6:2009
- DIP:
- EN IEC 61000-4-11:2020
- ImmunityStandards:
- RF:
- Standards:
- EN 300 328 V2.2.2
- EN 301 908-1 V13.1.1
- EN 301 908-2 V13.1.1
- EN 301 908-13 V13.1.1
- EN 303 413 V1.1.1
- Standards:
- Safety
- Standards:
- EN IEC 62311:2020
- AS/NZS 60950.1:2015
- IEC 62368-1:2018,
- EN IEC 62368-1:2020+A11:2020
- Standards:
Download Teltonika RUT956 cellular router technical datasheet
Tags: Teltonika, router, network, WLAN access point, WLAN AP, cellular, cellular router, 4G, LTE, Wi-Fi, WLAN, L
Recently viewed
Price Inc. Tax: 297,44€ Price Ex. Tax: 237€
Availability: Pre-Order