Teltonika RUT901 (RUT901000000) cellular router *new*

RUT901 cellular router delivers the top-rated features of its predecessors, the RUT950 and RUT951, to the market. The device ensures high-performance, providing automatic WAN failover to an available backup connection, guaranteeing network continuity and eliminating downtime.

By default we have in stock/ship units with European firmware/configurations in them (main difference in varying frequency ranges and power supplies). If you need any other hardware revisions/power supplies, then contact us before ordering. Some resivions might have a different price and we need to know this requirement before we place an order for them to the factory.

RUT901000000 European unit (Europe, Asia-Pacific, Australia) supports the following bands:

• 4G (LTE-FDD):
  • B1, B3, B5, B7, B8, B20, B28
• 4G (LTE-TDD):
  • B38, B40, B41
• 3G:
  • B1, B3, B5, B8
• 2G:
  • B3, B8

Standard package includes EU power supply

Router technical details:

• Mobile:
  • Mobile module:
    • 4G (LTE) – Cat 4 up to 150Mbps
    • 3G – up to 42Mbps
    • 2G - up to 236.8kbps
  • 3GPP Release:
    • Release 9
  • SIM switch:
    • 2 SIM cards
    • Auto-switch cases:
      • weak signal
      • Data limit
      • SMS limit
      • Roaming
      • No network
      • Network denied
      • Data connection fail
      • SIM idle protection
  • Status:
    • Signal strength (RSSI)
    • SINR
    • RSRP
    • RSRQ
    • EC/IO
    • RSCP
    • Bytes sent/received
    • Connected band
    • IMSI
    • ICCID
  • SMS:
    • SMS status
    • SMS configuration
    • Send/read SMS via HTTP POST/GET
    • EMAIL to SMS
    • SMS to EMAIL
    • SMS to HTTP
    • SMS to SMS
    • Scheduled SMS
    • SMS autoreply
    • SMPP
  • USSD:
    • Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/White list:
    • Operator black/white list
  • Multiple PDN:
    • Possibility to use different PDNs for multiple network access and services
  • Band management:
    • Band lock
    • Used band status display
  • APN:
    • Auto APN
  • Bridge:
    • Direct connection (bridge) between mobile ISP and device on LAN
  • Pass through:
    • Router assigns its mobile WAN IP address to another device on LAN
• Wireless:
  • Wireless mode:
    • IEEE 802.11b/g/n
    • Access Point (AP)
    • Station (STA)
  • Wi-Fi security:
    • WPA-PSK/WPA2-PSK Mixed Mode
    • WPA2-PSK
    • WPA2-EAP
    • WPA2-EAP/WPA3-EAP Mixed Mode
    • WPA3-EAP
    • WPA2-PSK/WPA3-SAE Mixed Mode
    • WPA3-SAE, OWE
    • AES-CCMP
    • TKIP
    • Auto cipher modes
    • client separation
  • SSID/ESSID:
    • SSID stealth mode and access control based on MAC address
  • Wi-Fi users:
    • Up to 100 simultaneous connections
  • Wireless Hotspot:
    • Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes.
  • Wireless Connectivity Features:
    • Fast roaming (802.11r)
    • Relayd
  • Wireless MAC filter:
    • Whitelist
    • Blacklist
• Ethernet:
  • WAN:
    • 1x WAN port 10/100Mbps
    • Compliance with:
      • IEEE 802.3
      • IEEE 802.3u
    • Supports auto MDI/MDIX
  • LAN:
    • 3x LAN ports 10/100Mbps
    • Compliance with:
      • IEEE 802.3
      • IEEE 802.3u
    • Supports auto MDI/MDIX
• Network:
  • Routing:
    • Static routing
    • Dynamic routing BGP
    • OSPF v2
    • RIP v1/v2
    • EIGRP
    • NHRP
    • Policy based routing
  • Network protocols:
    • TCP
    • UDP
    • IPv4
    • IPv6
    • ICMP
    • NTP
    • DNS
    • HTTP
    • HTTPS
    • SFTP
    • FTP
    • SMTP
    • SSL/TLS
    • ARP
    • VRRP
    • PPP
    • PPPoE
    • UPNP
    • SSH
    • DHCP
    • Telnet
    • SMPP
    • SMNP
    • MQTT
    • Wake On Lan (WOL)
  • VoIP pass through support:
    • H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring:
    • Ping Reboot
    • Wget Reboot
    • Periodic Reboot
    • LCP and ICMP for link inspection
  • Firewall:
    • Port forward
    • Traffic rules
    • Custom rules
  • DHCP:
    • Static and dynamic IP allocation
    • DHCP Relay
  • QoS / Smart Queue Management (SQM):
    • Traffic priority queuing by source/destination
    • Service
    • Protocol or port
    • WMM, 802.11e
  • DDNS:
    • Supported >25 service providers, others can be configured manually
  • Network backup:
    • Wi-Fi WAN
    • Mobile
    • VRRP
    • Wired options, each of which can be used as an automatic fail over
  • Load balancing:
    • Balance Internet traffic over multiple WAN connections
  • SSHFS:
    • Possibility to mount remote file system via SSH protocol
• Security:
  • Authentication:
    • Pre-shared key
    • Digital certificates
    • X.509 certificates
    • TACACS+
    • Radius
    • IP & Login attempts block
  • Firewall:
    • Pre-configured firewall rules can be enabled via WebUI
    • Unlimited firewall configuration via:
      • CLI
      • DMZ
      • NAT
      • NAT-T
  • Attack prevention:
    • DDOS prevention:
      • SYN flood protection
      • SSH attack prevention
      • HTTP/HTTPS attack prevention
    • Port scan prevention:
      • SYN-FIN
      • SYN-RST
      • X-mas
      • NULL flags
      • FIN scan attacks
  • VLAN:
    • Port and tag-based VLAN separation
  • Mobile quota control:
    • Mobile data limit
    • Customizable period
    • Start time
    • Warning limit
    • Phone number
  • Web filter:
    • Blacklist for blocking out unwanted websites
    • Whitelist for specifying allowed sites only
  • Access control:
    • Flexible access control of TCP
    • UDP
    • ICMP packets
    • MAC address filter
• VPN:
  • OpenVPN:
    • Multiple clients and a server can run simultaneously
  • OpenVPN encryption:
    • DES-CBC 64
    • RC2-CBC 128
    • DES-EDE-CBC 128
    • DES-EDE3-CBC 192
    • DESX-CBC 192
    • BF-CBC 128
    • RC2-40-CBC 40
    • CAST5-CBC 128
    • RC2-64-CBC 64
    • AES-128-CBC 128
    • AES-128-CFB 128
    • AES-128-CFB1 128
    • AES-128-CFB8 128
    • AES-128-OFB 128
    • AES-128-GCM 128
    • AES-192-CFB 192
    • AES-192-CFB1 192
    • AES-192-CFB8 192
    • AES-192-OFB 192
    • AES-192-CBC 192
    • AES-192-GCM 192
    • AES-256-GCM 256
    • AES-256-CFB 256
    • AES-256-CFB1 256
    • AES-256-CFB8 256
    • AES-256-OFB 256
    • AES-256-CBC 256
  • IPsec:
    • IKEv1
    • IKEv2
    • Encryption methods for IPsec:
      • 3DES
      • DES
      • AES128
      • AES192
      • AES256
      • AES128GCM8
      • AES192GCM8
      • AES256GCM8
      • AES128GCM12
      • AES192GCM12
      • AES256GCM12
      • AES128GCM16
      • AES192GCM16
      • AES256GCM16
• GRE:
  • GRE tunnel
  • GRE tunnel over IPsec support
• PPTP, L2TP:
  • Client/Server instances can run simultaneously
  • L2TPv3
  • L2TP over IPsec support
• Stunnel:
  • Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
• DMVPN:
  • Method of building scalable IPsec VPNs
• SSTP:
  • SSTP client instance support
• ZeroTier:
  • ZeroTier VPN client support
• WireGuard:
  • WireGuard VPN client and server support
• Tinc:
  • Tinc offers encryption, authentication and compression in its tunnels
  • Client and server support
• MODBUS TCP slave:
  • ID range:
    • Respond to one ID in range [1;255] or any
  • Allow Remote Access:
    • Allow access through WAN
  • Custom registers:
    • MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality.
• MODBUS TCP master:
  • Supported functions:
    • 01, 02, 03, 04, 05, 06, 15, 16
  • Supported data formats:
    • 8-bit: INT
    • UINT; 16-bit: INT
    • UINT (MSB or LSB first); 32-bit: float
    • INT
    • UINT (ABCD (big-endian)
    • DCBA (little-endian)
    • CDAB
    • BADC
• Data to server:
  • Protocol:
    • HTTP(S)
    • MQTT
    • Azure MQTT
    • Kinesis
• MQTT Gateway:
  • MQTT Gateway:
    • Allows sending commands and receiving data from MODBUS Master through MQTT broker
• DNP3:
  • Supported modes:
    • TCP master
    • DNP3 outstation
• Monitoring & management:
  • WEB UI:
    • HTTP/HTTPS
    • status
    • configuration
    • FW update
    • CLI
    • Troubleshoot
    • Event log
    • System log
    • Kernel log
  • FOTA:
    • Firmware update from server
    • Automatic notification
  • SSH:
    • SSH (v1, v2)
  • SMS:
    • SMS status
    • SMS configuration
    • Send/read SMS via HTTP POST/GET
  • Call:
    • Reboot
    • Status
    • Mobile data on/off
    • Output on/off
    • answer/hang-up with a timer
    • Wi-Fi on/off
  • TR-069:
    • OpenACS
    • EasyCwmp
    • ACSLite
    • tGem
    • LibreACS
    • GenieACS
    • FreeACS
    • LibCWMP
    • Friendly tech
    • AVSystem
  • MQTT:
    • MQTT Broker
    • MQTT publisher
  • SNMP:
    • SNMP (v1, v2, v3)
    • SNMP Trap
  • JSON-RPC:
    • Management API over HTTP/HTTPS
  • MODBUS:
    • Modbus TCP status/control
  • RMS:
    • Teltonika Remote Management System (RMS)
• IoT Platforms:
  • Cloud of Things:
    • Allows monitoring of:
    • Device data
    • Mobile data
    • Network info
    • Availability
  • ThingWorx:
    • Allows monitoring of:
    • WAN Type
    • WAN IP
    • Mobile Operator Name
    • Mobile Signal Strength
    • Mobile Network Type
  • Cumulocity:
    • Allows monitoring of:
    • Device model
    • Revision and serial number
    • WAN Type and IP
    • Mobile cell ID
    • ICCID
    • IMEI
    • Connection type
    • Operator
    • Signal strength
  • Azure IoT Hub:
    • Can send device IP
    • Number of bytes sent/received
    • Temperature
    • PIN count to Azure IoT Hub server
• System characteristics:
  • CPU:
    • Mediatek, 580MHz
    • MIPS 24KEc
  • RAM:
    • 128MB DDR2
  • FLASH storage:
    • 16MB
    • SPI Flash
• Firmware / Configuration:
  • WEB UI:
    • Update FW from file
    • Check FW on the server
    • Configuration profiles
    • Configuration backup
  • FOTA:
    • Update FW
  • RMS:
    • Update FW/configuration for multiple devices at once
  • Keep settings:
    • Update FW without losing the current configuration
• Firmware Customization:
  • Operating system:
    • RutOS (OpenWrt based Linux OS)
  • Supported languages:
    • Busybox shell
    • Lua
    • C
    • C++
  • Development tools:
    • SDK package with build environment provided
• Input / Output:
  • Input:
    • 1x digital Input
    • 0...6V detected as logic low
    • 8 ...30V detected as logic high
  • Output:
    • 1x digital output
    • Open collector output
    • max output 30V
    • 300mA
  • Events:
    • Email
    • RMS
    • SMS
  • I/O juggler:
    • Allows setting certain I/O conditions to initiate events
• Power:
  • Connector:
    • 1x 4-pin Molex Micro-Fit 3.0 power connector:
      • Compatible with Molex Micro-Fit 3.0 0430250400 connector housing
  • Input voltage range:
    • 9...30VDC, reverse polarity protection; surge protection >31VDC 10us max
  • Power consumption:
    • < 2W idle, < 7W Max
• Physical interfaces:
  • Ethernet:
    • 4x RJ45 ports 10/100Mbps
  • I/O’s:
    • 1x digital input
    • 1x digital output on 4-pin power connector
  • Status LEDs:
    • 1x Bi-color connection status
    • 5x Mobile connection strength
    • 4x Eth status
    • 1x Power
  • SIM:
    • 2x SIM slots (Mini SIM – 2FF)
    • 1.8V/3V
    • external SIM holder
    • eSIM (Optional)
  • Power:
    • 1x 4-pin Molex Micro-Fit 3.0 power connector
      • Compatible with Molex Micro-Fit 3.0 0430250400 connector housing
  • Antennas:
    • 2x SMA for LTE
    • 2x RP-SMA for Wi-Fi antenna connectors
• Reset:
  • Reboot/User default reset/Factory reset button
• Physical specification:
  • Casing material:
    • Aluminum housing
    • Plastic panels
  • Mounting options:
    • 35mm DIN rail (can be mounted on two sides)
    • Flat surface placement
• Operating environment:
  • Operating temperature:
    • -40...75°C
  • Operating humidity:
    • 10% to 90% non-condensing
  • Ingress protection rating:
    • IP30
• Regulatory & type approvals:
  • Regulatory:
    • CE/RED
    • UKCA
    • EAC
    • UCRF
    • CB
• EMC emissions & immunity:
  • IMMUNITY Standards:
    • EN 301 489-1 V2.2.3
    • Draft EN 301 489-17 V3.2.4
    • EN 301 489-52 V1.2.1
    • EN 55032:2015+A11:2020+A1:2020
    • EN 55035:2017+A11:2020
    • EN IEC 61000-3-2:2019+A1:2021
    • EN 61000-3-3:2013 + A1:2019+A2:2021
  • ESD:
    • EN 61000-4-2:2009
  • RS:
    • EN 61000-4-2:2009
  • EFT:
    • EN 61000-4-4:2012 
  • Surge protection:
    • EN 61000-4-5:2014+A1:2017
  • CS:
    • EN 61000-4-6:2014
  • DIP:
    • EN IEC 61000-4-11:2020
• RF:
  • Standards:
    • EN 300 328 V2.2.2
    • EN 301 511 V12.5.1
    • EN 301 908-1 V13.1.1
    • EN 301 908-2 V13.1.1
    • EN 301 908-13 V13.1.1
• Safety:
  • Standards:
    • EN IEC 62311:2020
    • EN IEC 62368-1:2018
    • EN IEC 62368-1:2020+A11:2020
    • EN 50665:2017

Download Teltonika RUT901 cellular router technical datasheet