Conical metal LED bezel with M6x0,75 RH thread for 3mm LED *new*

LED bezel lets you conveniently install LED into the chassis wall. Installation is carried out by drilling a suitable hole into the enclosure wall or some other panel. Stuff the bezel into it’s place and tighten it up with a nut. As a last phase stuff the LED inside the hole and lock it up with theincluded plastic plug. This way the LED is installed right there where you want it. In case you want to improve the quality and vibration resistance of the installation, you can use hot glue or some epoxy with or instead the suplied plastic cap. Also the LED bezel itself can be secured with glue.

As an idea one may tread the hole and screw the LED bezel into it’s place. This works especially well with thicker plastic or metal casings.

LED bezel technical details:

• Material:
  • Metal
• Thread:
  • M6x0.75 RH
• Threaded part lenght:
  • 6.3mm
• Suitable free hole:
  • 5.8mm
• Cone height:
  • 3mm
• Overall height:
  • 9.1mm
• Nut thickness:
  • 1.3mm
• Suitable spanner for nut:
  • 8mm
• Tolerance of threads and dimensions:
  • Exactly as it should be = Just like every thingie had been achined invidually
• Compatible LED:
  • 3mm diameter standard indicator LED
• Set contains:
  • Metal bezel
  • Metal nut
  • Metal wire spring washer
  • Plastic LED plug