Deek Robot SHT2010 digital hygrostat (temperature and humidity controller) -20..+60°C, 0-100% RH, 110-220VAC *new*

Compact panel mounted and intelligent digital temperature controller which can handle heating or cooling and drying or moisturization.

Hygrostat's technical details:

• Operating voltage:
  • 110...220VAC
• Operating principle:
  • 1x Thermostat
  • 1x Humidity meter
  • Thermostat has a configurable temperature for starting the relay output and where it shuts it off (configurable for heating or cooling)
  • Humidity meter has a configurable humidity level for starting the relay output and where it shuts it off (configurable for drying or moisturizing)
  • All buttons are touch buttons
• Hygrostat's outputs:
  • 2x NO relay outputs 250VAC / 30VDC, 10A (1x for humidity and 1x for temperature)
• Measurement range:
  • -20...+60°C
  • 0...100% RH
• Resolution:
  • 0,1°C
• Accuracy:
  • +/-0,3°C
  • 3% RH
• Temperature sensor:
  • 1x 0,9m combined temperature and humidity meter with 0,9m lead (Sensirion SHT20 humidity and temperature sensor IC)
  • Sensor connection pinout to the meter:
    • Pin 3 = Blue
    • Pin 4 = Yellow
    • Pin 5 = Green
    • Pin 6 = Red
• Tight installation hole:
  • 70,3x28,5mm
• Max panel thickness:
  • 16mm
• Front bezel dimensions::
  • 75x34,4x2,4mm

Operating instruction:

• Meter has two outputs, red for temperature and blue for humidity
• Adjustment buttons on left side are for temperature meter and on a right side for humidity meter
• Temperature setting adjustment:
  • Long push for 3s on the left up button and you get to output turn on temperature adjustment (flashes when in setup mode and adjusts by up and down buttons)
  • Return to normal operation by not touching the meter for 5s time
  • From the initial state by a long push for 3s on left down button you get to output shut off temperature adjustment
  • Return to normal operation by not touching the meter for 5s time
• Humidity setting adjustment:
  • Long push for 3s on the right up button and you get to output turn on humidity level adjustment (flashes when in setup mode and adjusts by up and down buttons)
  • Return to normal operation by not touching the meter for 5s time
  • From the initial state by a long push for 3s on right down button you get to output shut off humidity level adjustment
  • Return to normal operation by not touching the meter for 5s time

Download Sensirion SHT20 humidity and temperature sensor IC technical datasheet