Siemens SITOP POWER 5 6EP1333 1SL11 stabilized power supply unit, 120/230VAC output 24VDC/5A

Power supply for general use. Can be used as power supply for programmable logic controllers (PLC).

Siemens power supply unit technical details:

• Input: Single-phase AC:
  • Rated voltage V (in rated):
    • 120/230VAC
    • Settable via selector switch on device
  • Voltage range:
    • 85 to 132V/170 to 264VAC
  • Overvoltage strenght:
    • 2.3 x Vin rated, 1.3ms
  • Mains buffering at I(out rated):
    • > 20ms at Vin = 93/187V
  • Rated line frequency; range:
    • 50/60Hz; 47 to 63Hz
  • Rated current I (in rated):
    • 2.1/1.3A
  • Inrush current limitation (+25°C)
    • < 45A, < 3ms
  • Integrated line-side fuse:
    • F 4 A/250V (not accessible)
• Output: Stabilized, floating direct voltage:
  • Rated voltage V (out rated):
    • 24VDC
  • Total tolerance:
    • ± 3%
  • Stat. mains compensation:
    • Approx. 0.1%
  • Stat. load compensation:
    • Approx. 0.2%
  • Residual ripple (clock frequency: approx. 50kHz):
    • < 150mV pp (typ. 40mV pp )
  • Spikes (bandwidth: 20 MHz):
    • < 240mV pp (typ. 90mV pp)
  • Status display:
    • Green LED for 24V O.K.
  • Starting delay/voltage rise:
    • < 2s/typ. 60ms
  • Rated current I (out rated):
    • 5A
  • Efficiency:
    • Efficiency at Vout rated , I out rated:
      • Approx. 87%
    • Power loss at Vout rated , I out rated:
      • Approx. 18W
  • Current limitation:
    • 5.5 to 6.5A
  • Protective class:
    • Class I
  • Discharge current:
    • < 3.5mA (typ. 0.3mA)
  • Degree of protection (EN 60529):
    • IP20
  • Interference emission:
    • EN 55022 Class B
  • Line harmonics limitation:
    • EN 61000-3-2
  • Interference immunity:
    • EN 61000-6-2
  • Ambient temperature range:
    • 0 to +60°C with natural convection
  • Humidity rating:
    • Climatic class 3K3 acc. to EN 60721, no condensation

Download Siemens SITOP POWER 5 6EP1333 1SL11 stabilized power supply unit, 120/230VAC output 24VDC/5A technical datasheet