Phoenix Contact EMG 75-NZG/G24/2 art nr 2942454 voltage regulator module in 24,5...29VAC / 27...30VDC out 24VDC 2A

Voltage regulator module, secondary switched-mode power supply. Module can be used when it is critical to get exact 24VDC operating voltage, but there is a risk that the supply voltage is oscillating. This can happen for example if using just iron core transformers for voltage supply.

Technical data

• Input data:
  • Nominal input voltage range:
    • 24.5...29VAC
  • AC frequency range:
    • 50Hz...60 Hz
  • Nominal power consumption approx.:
    • 60VA
  • Input fuse:
    • 4A (slow-blow TR 5, internal, solderable)
• Output data:
  • Nominal output voltage:
    • 24V DC ±2 % (settable from 5.1...24.5VDC)
  • Output current:
    • 2A
  • Residual ripple:
    • ≤ 400 mVPP
  • Type of protection:
    • Electronic current limitation at 2.8A
  • Protective circuit/component:
    • Varistor
• General:
  • Operating voltage display:
    • Green LED
  • Operating mode:
    • 100% operating factor
  • Degree of protection:
    • IP20
  • Ambient temperature (operation):
    • 0...55°C
  • Mounting position:
    • On horizontal DIN rail
  • Assembly instructions:
    • Can be aligned with 5mm spacing
• Connection data, input:
  • Connection method:
    • Screw connection
  • Conductor cross section solid min.:
    • 0.2mm²
  • Conductor cross section solid max.:
    • 4mm²
  • Conductor cross section stranded min.:
    • 0.2mm²
  • Conductor cross section stranded max.:
    • 2.5mm²
  • Stripping length:
    • 8mm
  • Screw thread:
    • M3
• Connection data, output:
  • Connection method:
    • Screw connection
  • Conductor cross section solid min.:
    • 0.2mm²
  • Conductor cross section solid max.:
    • 4mm²
  • Conductor cross section stranded min.:
    • 0.2mm²
  • Conductor cross section stranded max.:
    • 2.5mm²
  • Stripping length:
    • 8mm