Siemens Simatic S7-300 CP 342-2 1P6GK7342-2AH01-0XA0

Siemens Simatic S7-300 series CP 342-2 module can be operated in the programmable logic controllers (PLCs) of the S7-300
range. It allows the connection of one AS-i chain to the programmable logic controllers.

Module's technical details:

• Bus cycle time:
  • 5ms with 31 slaves
• Configuration:
  • By switches on the front panel or with FC “ASI_3422”
• AS-i profile supported:
  • Without FC “ASI_3422”: M0 or With FC “ASI_3422”: M1
• Connection to the AS-i cable:
  • Via the S7-300 front connector with screw contact (20 pin)
  • Current load capability from connection 17...19 or from connection 18...20 maximum 4 A
• Address range
  • 16 input bytes and 16 output bytes in the analog area of the S7-300
• Power supply
  • Simatic back plane bus 5VDC
• Current consumption from the AS-i cable:
  • Max 100mA
• Power supply from the AS-i cable:
  • According to the AS-i specification
• Power consumption from 5VDC:
  • Max. 200mA

Download Siemens Simatic S7-300 series programmable logics technical datasheet

Download Siemens Simatic S7-300 series AS-interface master module CP 342-2 user manual