IFM AC5011 AS-i E-EMS-base coupling module with FC addressing socket and IFM AC2008 AS-i active classic I/O module with 4x PNP output

AS-i interface (Actuator Sensor Interface) field bus component which is suitable to use as part of system where other components are compatible AS-i bus system. AS-i system transfers only little data (167kbit/s), but it delivers data fast (5ms). Because of this the bus is mostly used to transmit sensors and switches on/off state informations in a digital format.

Technical specifications:

IFM AC5011 AS-i E-EMS-base with FC-E addressing plug and external power supply

• Installation method:
  • DIN rail
  • Free installation through 5,5mm holes at the corners
• Electrical design:
  • FC-E coupling module with external power supply
• Operating voltage:
  • 26,5-31,6Vdc
• IP protection class:
  • Depending on the upper part used
• Connections:
  • AS-i interface to module upper part
  • Quick mounting technology for AS-i flat cable
  • Addressing plug
• Contact rating:
  • <2A
• Housing material:
  • PBT (Polybutylene terephthalate)(Pocan, Crastin, Duranex...)
• Operating temperature:
  • -25...85°C

IFM AC2005 AS-i active classic I/O module with 4x transistor PNP outputs

• Connections:
  • 4x M12
  • AS-i interface to FC lower parts
• Operating voltage:
  • 26,5...31,6Vdc
• Current consumption:
  • <60mA
• Output function:
  • Transistor PNP
• Voltage range:
  • 24Vdc
• Max current load per output:
  • 1000 / 500mA (DC12 / DC13)
• Electrically separated:
  • Yes
• Integrated watchdog:
  • Yes
• Short-circuit proof:
  • Yes
• AS-i-profile:
  • S-8.0
• I/O configuration:
  • 8 (Hex)
• ID-code:
  • 0 (Hex)
• AS-i certificate:
  • 04301
• Data-bits:
  • D0
    • O-1 / pin 4
  • D1
    • O-2 / pin 4
  • D2
    • O-3 / pin 4
  • D3
    • O-4 / pin 4
• IP protection class:
  • IP67
• Housing material:
  • PBT (Polybutylene terephthalate)(Pocan, Crastin, Duranex...)
• Operating temperature:
  • -25...85°C