IFM AC2709 AS-i active module I/O module with 4x sourcing transistor outputs 24VDC 50mA and 4x sinking 24VDC inputs for Klöckner-Möller housing RMQ-Titan: I3M, I4M, I6M

AS-i interface (Actuator Sensor Interface) field bus component which is suitable to use as part of system where other components are compatible AS-i bus system. AS-i system transfers only little data (167kbit/s), but it delivers data fast (5ms). Because of this the bus is mostly used to transmit sensors and switches on/off state informations in a digital format.

Technical specifications:

IFM AC2709 AS-i active module I/O module with 4x sourcing transistor outputs 24VDC 50mA and 4x sinking 24VDC inputs for Klöckner-Möller housing RMQ-Titan: I3M, I4M, I6M

• Connections:
  • 12x wires from which 2x have Wago spring connectors in them
• Operating voltage:
  • 26,5...31,6VDC AS-i
• Current consumption:
  • <250mA AS-i
  • 200mA max / module
• Built-in inputs:
  • 4x sinking inputs
    • Max. 29VDC 3mA
• Input current "1" / "0":
  • >3mA / <1,5mA
• Switching level for "1" signal:
  • >10V
• Short-circuit proof:
  • Kyllä
• Built-in outputs:
  • 4x sourcing transistor outputs
    • 15...29VDC 50mA unit
• Max current load per output:
  • 50mA
• Electrically separated:
  • Yes
• Short-circuit proof:
  • Yes
• Extended addressing mode possible
  • Version 2.1 / no
• AS-i-profile:
  • S-7.0.F
• I/O configuration:
  • 7.F (Hex)
• ID-code:
  • 0 (Hex)
• IP protection class:
  • IP20
• Operating temperature:
  • -25...+60°C