Teltonika TSW010 (TSW010000000) DIN rail switch *new*

DIN rail switch.

By default we have in stock/ship units with European firmware/configurations in them (main difference in varying frequency ranges and power supplies). If you need any other hardware revisions/power supplies, then contact us before ordering. Some resivions might have a different price and we need to know this requirement before we place an order for them to the factory.

TSW010000000 unit supports the following bands:

• N/A

Vakiosetti sisältää EU virtalähteen. Standard package includes EU power supply

Rail switch technical details:

• Ethernet:
  • LAN:
    • 5x ETH ports, 10/100 Mbps
    • Supports auto MDI/MDIX
  • IEEE 802.3 series standards:
    • 802.3i
    • 802.3u
    • 802.3x
    • 802.3az
• Performance specifications:
  • Bandwidth (Non-blocking):
    • 1Gbps
  • MAC address table size:
    • 2K entries
  • Jumbo frame support:
    • 2048bytes
• Power:
  • Connector:
    • 1x 2-pin Molex Micro-Fit 3.0 power connector:
      • Compatible with Molex Micro-Fit 3.0 0430250400 connector housing
         
  • Input voltage range:
    • 9...30VDC
  • Power consumption:
    • Idle: 0.3W / Max: 0.9W
  • PoE (passive):
    • Possibility to power up through ETH1 ports
    • Not compatible with following standards:
      • IEEE 802.3af
      • IEEE 802.3at
      • IEEE 802.3b
      • Mode B
      • 9...30VDC
• Physical interfaces:
  • Ethernet:
    • 5x RJ45 ports 10/100Mbps
  • Status LEDs:
    • 10x LAN status LEDs
    • 1x Power LED
  • Power:
    • 1x 2-pin Molex Micro-Fit 3.0 power connector:
      • Compatible with Molex Micro-Fit 3.0 0430250400 connector housing
  • Other:
    • 1x grounding screw
• Physical specification:
  • Casing material:
    • Aluminum housing
  • Mounting options:
    • 35mm DIN rail or wall mounting (additional kit needed)
    • Flat surface placement
• Operating environment:
  • Operating temperature:
    • -40...75°C
  • Operating humidity:
    • 10% to 90% non-condensing
  • Ingress protection rating:
    • IP30
• Regulatoy & type approvals:
  • CE
  • REACH
  • RoHS
  • WEEE
  • UKCA
  • FCC
  • IC
  • CB
  • RCM
• Safety:
  • EN IEC 62368-1:2020+A11:2020

Download Teltonika TSW010 DIN rail switch technical datasheet