12-24VDC 4 channel DMX512 operated PWM LED controller with 4x 8A channel DMX512 decoder, common anode

DMX512 decoder–based 4-channel LED controller that can be used with single-color and RGB lights (lamps, strips, modules). The controller receives a DMX512 control signal and drives the LEDs connected to its channels using a PWM (Pulse Width Modulation) signal. This device allows lighting to be connected to a DMX control system and supports brightness adjustment as well as color and lighting mode control (if you are using an RGB LED strip).

Usage examples:

• Stage and theatre lighting.
• Event and live performance lighting.
• Architectural and ambient lighting.
• Restaurants, clubs, and retail spaces.
• RGB / RGBW control of LED strips and LED modules.

Controller technical details:

• Operating voltage:
  • 12...24VDC
• Outputs:
  • 4x channel
    • Suitable for common anode connected LEDs, i.e. the LEDs have a common positive terminal.
• Output max current:
  • 8A per channel
    • Note, however, that the power supply connector can handle a maximum of 15A (4 × 8A = 32A, so the connector would melt).
• Max output power:
  • 12VDC:
    • 384W (max 96W per channel).
  • 24VDC:
    • 768W (max 192W per channel).
• Selector switches:
  • DIP switch number, DMX address value, DIP-switch function mode (if FUN mode is selected):
    • 1, 1, red
    • 2, 2, green
    • 3, 4, blue
    • 4, 8, yellow
    • 5, 16, violet
    • 6, 32, cyan
    • 7, 64, white
    • 8, 128, seven color jumping change, 8 speed levels.
    • 9, 256, seven color sliding change, 8 speed levels.
    • FUN
      • When FUN mode is enabled, the device does not receive DMX control.
      • If color changing is enabled in FUN mode, DIP switches 1–7 control the speed of the color changes.
      • If color changing is not enabled in FUN mode, DIP switches 1–7 set the RGB LED strip to the device’s internally preset colors.
• Power supply and load connections:
  • Power supply:
    • V+ (12...24VDC) (directly connected to output COM-connector).
    • V- (GND)
  • Output:
    • COM (common anode)
    • CH1 (red)
    • CH2 (green)
    • CH3 (blue)
    • CH4 (white)
  • DMX connection:
    • Input:
      • 3pin XLR male:
        • 1 = GND
        • 2 = data-
        • 3 = data+
      • RJ45:
        • 1 = data+
        • 2 = data-
        • 3-6 = not connected
        • 7-8 = GND
    • Output:
      • 3pin XLR female:
        • 1 = GND
        • 2 = data-
        • 3 = data+
      • RJ45:
        • 1 = data+
        • 2 = data-
        • 3-6 = not connected
        • 7-8 = GND
• Operating temperature:
  • -20...+60°C

Download 4 channel DMX512 RGB LED controller technical datasheet