Arcotronics F.LL.DH.100A.025.I1 250/440VAC 50/60Hz 100A feed through filter with 2x M8 connection screws

Feed through filter is used when a relatively low frequency signal is needed in or out of an enclosed shielded space. This component consists of 2x capacitors and 1x inductor and as a combination they create LC filter circuit, which provides good attenuation capabilities up to a 1GHz interfering signals. Such filter can be used in screened rooms, high frequency welding equipment, power supplies and in telecommunication systems.

Feed-through filter technical details:

• Nominal operating voltage:
  • 250/440VAC
• Test voltage:
  • 2700VDC
• Max current capacity @ 40°C ambient temperature:
  • 100A
• Intestines:
  • 2x 0,1µF capacitor (class Y)
  • 1x inductor coil
• Dimensions:
  • Check datasheet
• Typical insertion loss:
  • 0,01MHz:
    • -
  • 0,1MHz:
    • -
  • 1MHz:
    • 20dB
  • 10MHz:
    • 90dB
  • 100MHz:
    • >100dB
  • 1000MHz:
    • >100dB
• Electrical connection:
  • 2x M8x1.25 RH stainless steel studs (Stainless steel nuts and washers included as long as we have them in stock)
• Installation method:
  • Installed into 30mm hole with a flange through 4x 4.5mm holes which are with 35mm spacing
• Operating temperature range:
  • -40...85°C
• Climatic category:
  • GPC (40/085/56)
    • -40...85°C for 56 days
• Construction:
  • Stainless steel case with plastic sealed resin filled construction

Download Kemet Arcotronics F.LL.DH-F.LL.DU series power feed through filters technical datasheet