Telemecanique ATV16U09M2 Altivar 16 variable speed drive, 1~, 0,37kW, 208/240VAC, 50-60Hz

The Telemecanique Altivar 16 Square D ATV16U09M2 is an AC variable speed drive, also called a frequency inverter or VFD - variable frequency drive. It's designed for controlling the speed and torque of asynchronous AC motors. This drive is suitable for small motor applications in industrial and commercial settings, providing simple and cost-effective motor control.

Inverter technical details:

• Input voltage (single phase) and frequency:
  • 208...240VAC
  • 50...60Hz
• Output voltage and frequency:
  • 0...as much as input voltage
  • 50...60Hz
• Line current:
  • 4A
• Rated current:
  • 2,1A
• Max. transient current:
  • 3,2A
• Total power dissipated at rated load:
  • 22W
• Overtorque:
  • 150% of motor rated torque (typical value ± 5%, from 5 to 50/60Hz)
• Acceleration and deceleration ramp:
  • Linear 3s from 0 to 50...60Hz (automatic adaptation of ramp times when transient torque is exceeded)
• Speed controller protection:
  • Supply overvoltage / undervoltage
  • Short circuit:
    • Between output phases
    • Between output phases and ground
    • Internal control supplies (+10, +24).
  • Overvoltage / over heating
• Motor protection:
  • Thermal : I².t if rated motor current = 0.9 In (rated current) of the speed controller.
• Operating temperature:
  • 0...+40°C
• Maximum humidity:
  • 93% without condensation or dripping water.
• Altitude:
  • Less than 1000m, above that, derate power by 3% for each additional 1000m.
• Protection class:
  • IP30
• Standards /certification
  • IEC
  • VDE
  • UL
  • CSA

Download Telemecanique Altivar 16 series variable speed drive technical datasheet