Diotec Semicondutor KBPC5010FP 1~ full bridge rectifier bridge, 1000V 50A *new*

A diode bridge is an arrangement of four (or more) diodes in a bridge circuit configuration that provides the same polarity of output for either polarity of input. When used in its most common application, for conversion of an alternating-current (AC) input into a direct-current (DC) output, it is known as a bridge rectifier. A bridge rectifier provides full-wave rectification from a two-wire AC input. The essential feature of a diode bridge is that the polarity of the output is the same regardless of the polarity at the input. The diode bridge circuit was invented by Polish electrotechnician Karol Pollak. The German physicist Leo Graetz independently invented and published a similar circuit. Today the circuit is sometimes referred to as a Graetz circuit or Graetz bridge.

Rectifier bridge technical details:

• Leg spacing:
  • Check datasheet
• Leg cross-section dimensions:
  • 0,8x6,35mm Faston connectors
• Operation method:
  • For single phase rectification
• Max recurrent peak reverse voltage (U_RRM):
  • 1000V
• Max RMS bridge input voltage (U_RMS):
  • 700V
• Max average forward output current T_C=50°C (I_O):
  • 50A with heatsink (-20% for capacitive load)
  • 46A with heatsink for capacitive load
  • Output current should be limited if case temperature stars going beyond 50°C
• Peak forward surge current 8.3ms single half sine wave (I_FSM):
  • 450A
• Max forward voltage drop (U_F):
  • 1,1V
• Max DC reverse current at rated DC blocking voltage per element (I_R):
  • T_A=25°C
    • 10µA
• Typical junction capacitance (C_J):
  • 185pF
• Typical thermal resistance (RθJA):
  • 1,2°C/W
• Operating temperature range (T_J):
  • -55...150°C
• Package:
  • KBPC

Download Diotec Semiconductors KBPC5001FP-KBPC5012FP series full bridge rectifier technical datasheets