Nokia Capacitors MDX 20/22kVAR 400/415VAC 3x 201µF compensation capacitor

The compensation capacitor can be found in the vicinity of a large inductive load or from an electrical cabinet supplying it, or at the latest from a electrical cabinet supplying the property. The compensation capacitor compensates for the reactive reactive power caused by inductive loads, i.e. power that does nothing but loads the electrical network. The consumer is not sanctioned for this, but industry and commercial real estate get their share of these from the power company... And usually even progressively. Compensation capacitors usually have a stated amount of VAR that it can compensate from the network. Note that if you compensate for the inductive reactive power too much then you will succeed in creating capacitive reactive power. So moderation here too. The right compensation capacitor can either be calculated, measured or tested and measured. We suggest the first two options.

Capacitor technical details:

• Capacitance:
  • 3x 201µF (measured) connected in delta
• Intended use:
  • Improving the power factor of the property's electrical network by compensating for the reactive power load of the property
• Max operating voltage:
  • 400/415VAC 50Hz
• Max impulse voltage:
  • 3/15kV
• Compensation capability:
  • 20/22kVAR
• Min operating temperature:
  • -40°C
• Mounting:
  • Through 2x 10x18mm oval holes
• Capacitor dimensions:
  • 285x125x300mm
  • 350x125x300mm including mounting flanges
• Connectors:
  • M8 studs for cable shoes or cables

Download Nokian capacitors NDX, MDX, HDX, FDX, SDX, KDX, ADX and TDX series capacitors technical datasheet

Download Nokian capacitors power factor correction information