DIY More yellow 2,42" 128x64px 3,3v OLED display module with SSD1309 driver, SPI/I2C

OLED display module is energy efficient yet self illuminating display. Small form factor and easy to use these are the character that make this an awesome little display in various do it yourself electronic projects. Display module can be used for example with with Arduino's or STM32 microcontrollers.

Display module technical details:

• Display type:
  • OLED
• Display color:
  • Yellow
• Resolution:
  • 128x64px dot matrix
• Display module overall dimensions:
  • 72x43x6mm
• Display's nominal size (display area's diagonal length):
  • 2,42" (61,46mm)
• Mounting holes:
  • 4x 3mm holes with 39x68mm spread
• Pinout:
  • GND (Ground)
  • VCC (Power supply positive)
  • SCL (Clock line)
  • SDA (Data line)
  • RES (Reset line)
  • DC (Data / command)
  • CS (Chip select), if not in use, it can be grounded by jumping it through R7 to ground
• Operating voltage:
  • 3,3VDC
• Driver IC:
  • SSD1309
• Interface selection between SPI or I²C is made with the help of R3, R4 and R5:
  • For I²C communication
    • R3, 4,7kΩ
    • R4, empty
    • R5, 0Ω (or just jump it)
  • For SPI communication (default configuration):
    • R3, empty
    • R4, 4,7kΩ
    • R5, 4,7kΩ

Our selfmade tilt sensor device shown in the pictures is not included in the sale. It just happened to be the closest device on hand where the screen could be showcased. In other words consider it as serving proposal.

Download Solomon Systech SSD1309 128x64px dot matrix OLED/PLED display driver technical datasheet